flashing
-1 n. கொழுந்துவிட்டெரிதல், விளம்பரப்படுத்துதல், திடீரென நீர் உடைப்பெடுத்துப் பெருகுதல், (பெ.) ஔதக்கதிர்களை உமிழ்கின்ற, மின்னுகிற, பளபளப்பான, பளிச்சென ஔதவிடுகிற.-2 n. கூடல் தகடு, மழைநீர் உள்ளே ஊறாமல் விலக்குதற்காக மோட்டின் கூடல்வாய்களிற் பொருத்தப்படும் உலோகத் தகடு.
Flash"ing, n. 1. (Engineering) Defn: The creation of an artifical flood by the sudden letting in of a body of water; -- called also flushing. 2. (Arch.) Defn: Pieces of metal, built into the joints of a wall, so as to lap over the edge of the gutters or to cover the edge of the roofing; also, similar pieces used to cover the valleys of roofs of slate, shingles, or the like. By extension, the metal covering of ridges and hips of roofs; also, in the United States, the protecting of angles and breaks in walls of frame houses with waterproof material, tarred paper, or the like. Cf. Filleting. 3. (Glass Making) (a) The reheating of an article at the furnace aperture during manufacture to restore its plastic condition; esp., the reheating of a globe of crown glass to allow it to assume a flat shape as it is rotated. (b) A mode of covering transparent white glass with a film of colored glass. Knight. Flashing point (Chem.), that degree of temperature at which a volatile oil gives off vapor in sufficient quantity to burn, or flash, on the approach of a flame, used as a test of the comparative safety of oils, esp. kerosene; a flashing point of 100º F. is regarded as a fairly safe standard. The burning point of the oil is usually from ten to thirty degree above the flashing point of its vapor. Flash"ing, n. 1. (Engineering) Defn: The creation of an artifical flood by the sudden letting in of a body of water; -- called also flushing. 2. (Arch.) Defn: Pieces of metal, built into the joints of a wall, so as to lap over the edge of the gutters or to cover the edge of the roofing; also, similar pieces used to cover the valleys of roofs of slate, shingles, or the like. By extension, the metal covering of ridges and hips of roofs; also, in the United States, the protecting of angles and breaks in walls of frame houses with waterproof material, tarred paper, or the like. Cf. Filleting. 3. (Glass Making) (a) The reheating of an article at the furnace aperture during manufacture to restore its plastic condition; esp., the reheating of a globe of crown glass to allow it to assume a flat shape as it is rotated. (b) A mode of covering transparent white glass with a film of colored glass. Knight. Flashing point (Chem.), that degree of temperature at which a volatile oil gives off vapor in sufficient quantity to burn, or flash, on the approach of a flame, used as a test of the comparative safety of oils, esp. kerosene; a flashing point of 100º F. is regarded as a fairly safe standard. The burning point of the oil is usually from ten to thirty degree above the flashing point of its vapor.